Skip to main content

Is it easy to install LED wall pack lights? Check user guide

Is it easy to install LED wall pack lights

While owning a house, you need to light the indoor as well as outdoor places properly. The elevated darkness can become a helpful source for intruders to enter your home. Simple use of LED wall pack lights outside your premises can eliminate the possibility of any thieves barging in. Plus, the safe environment can be enhanced as better lighting fixtures can transform your outdoors into a secure place with a pleasing look. Wall pack lights are considered to be suitable lighting fixtures not only for residential premises but also for commercial ones. The complete LED wall pack lights installation guide is available in this blog to help you get quality security lights.

Why LED Wall Pack Lights are the Best?

When it comes to the best lighting fixture, no one will go for traditional ones, as LED lights have already transformed the entire meaning of lighting. In terms of security lighting, wall pack LED lights are designed to promote a safe feel by emitting adequate brightness for excellent visibility in any outdoor space. The lights are known for being easily installed on the exterior walls of any parking lot, garage, hotel, home, office, gas station, factory, warehouse, sports facility, hospital, etc. Therefore, the demand for LED wall pack fixtures is considerable, prompting everyone to lift their lighting quality for security and visibility purposes.

How to Install LED wall pack light?

Installing LED wall pack lights is not complicated; you need to pay attention and follow the below steps.

install LED wall pack lights

Remove the cover

To begin the installation, you need to take out the lights and loosen the screws. When you have removed all the screws, detach the fixture to pull off the quick connect terminal. At the time of completing the step, make sure your activity will not damage the light. 

Drill the holes

The next step is to use the driller to make holes in the bottle of light. After you drill the holes properly, paste the EVA mat on it. Not only in the bottle of light, but you also need to make holes on the wall to mount your wall pack LED lights.

Mount the lights on the wall

When you successfully make the holes to mount the light on the wall, you need to loosen the bottom plate of the lighting fixture to put the wiring through the holes. After that, you can screw the bottom cover with the junction box on the wall.

Connect the wires

The next step is to connect the wires correctly. It is an essential part of installing wall pack LED lights as connecting the wires exactly will give you performance without any hindrance. In case you make a mistake while attaching the wires, the light will not work or perform improperly.

Screw the cover

You need to connect the quick connect terminal to screw the fixture with the bottom plate. Attaching the quick connect terminal is necessary as the lighting fixture will not work if you do it wrong.

Precautions to use while installing the LED wall pack lights

Below are some precautions that you must follow before or while installing the lights on your premises.

  • The first precaution you should take is to avoid the use of an electrical generator to test the LED light.
  • You need to abide by the law and regulations regarding the electrical activity of your country, region, and locality.
  • Make sure that you are installing the lights in your place where the weather is clear means there is no rain outside.
  • Another precaution you should follow is avoiding all the possibilities of electric shock or fire. You must have professional electric knowledge.
  • Before installing LED wall pack lights, you must wear gloves for safety.
  • When you complete the installation process, and any spark occurs after turning on the lights, immediately turn it off and inform the electrician.

Conclusion

The entire process of installing LED wall pack Lights will make it easier for you to install the lights at your location. Some safety precautions will ensure that you are going to start the process with full safety. Apart from that, you must select the lights that suit all your lighting needs and maintain the high performance for a long period of time. You must choose the lighting fixture which can withstand the different weather conditions and perform durably.

Labels

Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

LED Flood Lights vs. LED Spotlights

When doing an outdoor lighting project, there are so many options to choose from. Among all available lights, the most energy-efficient ones are easily LED technology. Once you know LED is the way to go, you have to know what beam you need, how wide a beam is necessary, and how to calculate the beam spread you'll need. Let's look at a few of the key differences between an outdoor LED flood lights and the LED spotlight. The difference in beam angle will determine what you can use each for, and it essentially comes down to personal preference in most cases. The only time that it matters is when picking out your LED flood light and LED spotlight options. Flood Lights: Floodlights typically have a beam angle between 60-120 degrees, wide enough to cover a large area without much adjustment. The spotlights we offer all have a beam angle of 7 or 8 degrees or even 15 degrees for the super focused beam. With such a narrow beam, it can be hard to adjust the angle. As far as wattage goe...
Post a Comment
Read more

High Bay LED Lights: Effective Warehouse Lighting Solutions

Finding the right lighting solution for your warehouse can be difficult, and it requires careful planning. LED warehouse lights come with lower maintenance costs and better quality illumination. A lot depends upon warehouse layout and illumination requirements in accordance with the work areas. They are also required for factories, workshops, body shops, and commercial shops. Ceiling height The ceiling needs to be high enough for warehouse lighting solutions. The ideal height should be kept between 15ft-25ft with 21,000 lumens of brightness provided by the LED warehouse lights.  Less heat The difference between traditional lighting and LED warehouse lights is the dissipation of heat. UFO LED high bay lights to generate less heat and also help in lowering the business costs. Durability Factories and warehouses have a rugged environment where heavy machinery and equipment are frequently used. High bay LED lights stand against a busy warehouse's wear and tear for a longer time duratio...
7 comments
Read more

Taking a Fresh Look at Garage Lighting

  The garage is a commonly used space, and many people use their garages for storage or workshops; with this increase in popularity, though, there’s an even greater need to make sure that your lighting stays on point. With the increased use of our garages, it’s more important than ever to have great lighting in here. Here are some tips on how you can keep your garage well-lit so that all needs for storage and artistry will be met. Choose the lights based on their functions Let’s discuss the lighting categories. Ambient lighting - It generally includes garage door openers with in-built lights and LED garage lighting fixtures that can be installed on the ceiling.  Task lighting - Light fixtures attached with wires and hooks so that you can move as per your requirements. The light fixtures hang from the ceiling with the help of chains. Accent lighting - This segment includes LED pendant lights that remain extended from the ceiling and LED wall sconces affixed to the wall. It ...
Post a Comment
Read more