LED Lights - Accessories

In this new era, ballast is a device that was used to control the voltage passing through old fluorescent tubes. Nowadays, people are the habitat of LED tube lights that do not need any ballast and are not dependent on it but can also work with a ballast. Ballast is commonly used in fluorescent or HID light sources to continue the illumination by managing electricity distribution throughout the fixture. Since the arrival of LED tube lights in the market, the demand for traditional tube lights has decreased to almost nothing, and this is why many LED tube lights are compatible with all ballast to come in use with ease. Which light sources are dependent on the ballast? The table below will understand you properly about the light source that depends on the ballast. Incandescent : The light source does not require any ballast to illuminate the place. Halogen : Ballast is not meant for a halogen light source as it can operate without using any ballast. Fluorescent : This light source needs ...

You may not pay much attention to the overhead lighting, but it plays an important role in warehouse operations. Choosing the right type of warehouse lighting fixtures is necessary to keep your operations running smoothly, and it also helps in increasing the productivity and morale of the workers.    The world is switching to LED lights for better and more efficient lighting. LED lights are easy to install and handle compared to traditional lighting options. Unlike past warehouse lighting products, LED  lights have numerous advantages, and it is the best product in the market. There are plenty of LED lighting fixtures available in the market for large commercial spaces. Compare and choose the best warehouse lighting fixtures as per your need.  Types of Commercial spaces Where LED LIGHTING FIXTURES Can be used: 1: Warehouse 2. Factory 3. Industries Read the advantages of LED before you finalize your Warehouse Lighting Fixtures.  LED warehouse lighting fixtu...

  Selecting the right replacement for old inefficient lighting fluorescent lighting fixtures is important. The selection of the product happens after the right installation is determined. The method of installation is basically determined by the types of tube technology you use. There are two tube technologies actually; T8 or T12. If you do not know what you have installed already, take the tube/bulb out and read the markings on the end. If you do not see the markings, get a scale and try to measure the diameter of the tube. Names And Diameters The nomenclature of these lights depends on the size of these fixtures.  If the diameter of the tube is one inch, then the tube is T8. If the diameter happens to be 3/2 inch, the tube is T12.  If the measurement comes out to be ⅝ inches, the tube is T5.  If the tube is T8, it will certainly have an electronic ballast. T12 tubes will have a magnetic bypass only. To confirm the kind of ballast that you actually have, open the fi...

  Should you replace your current fluorescent tubes with LED tubes? The answer is YES. BECAUSE LED tubes are 70% more energy-efficient than fluorescent tubes. LED tubes are more directional in nature. They can emit light in the direction you want. LED tubes are available in different color temperatures. LED tube lights are dimmable as well. Here is something you need to know if you are considering switching to  LED tubes . Fluorescent tubes are often installed/mounted into the ceilings. They are also connected directed to mains electricity.  So what if you need to revamp the entire fixture with and replace it with new LED tubes?  Well, this is not going to be a wise decision at all as it will cost you a lot. Replacing your existing fluorescent tube with LED tube lights is the new fixture will be a far better alternative/option.  There are few fluorescent tubes, T8 4-ft, T12 4-ft, and T5 4-ft fluorescent tubes available in the market.   Therefore, it is...

  Fitting an LED tube is an easy task. However, one must first know which ones to choose among the three types of LED tubes available on the market. There are four kinds of LED tubes: ballast compatible tubes, ballast bypass tubes, retrofit tubes, and hybrid tubes. In the present scenario, many households and commercial facilities are still in the process of transitioning to the more modern and energy-efficient LED technology. Yet, it’s quite common to see existing fluorescent tube fixtures in many properties. Since, installing  LED tube lights   in brand new properties (offices, homes, etc.) is pretty much self-explanatory,  here we will focus on the retrofitting process. The process for retrofitting an LED tube light into any existing fluorescent strip lighting fixture module differs slightly. The differences in the installation process depends on what type of fixture setup is in use. One of the major deciding factors is the age of the pre-existing fixture. Older f...