Skip to main content

Common Mistakes we Make While Buying LED Work Lights

Common Mistakes we Make While Buying LED Work Lights

Have you ever felt like your space looks off or failed to deliver the expected results even though you spent a lot of money on lighting fixtures? Most likely, you've made common mistakes that most people make when buying a light fixture. Nowadays, LED lights are widely popular for their versatility and innumerable benefits. Also, the range of lighting fixtures offers the most desired result after installation at any place. In the list of lighting fixtures, LED work lights are well-known for their brilliant role in brightening up your construction sites or other workplaces. But, some people make mistakes when buying the lights that might disappoint them by providing different results than expectations.

Lumens Output


At the time of purchase, it is a common thing to consider the total lumens output of the light. You have to go for the high lumens to get perfect visibility when it comes to LED work lights. But, sometimes, you have to select the light with average lumen output as per the requirement of your space. If you install a high brightness light in a small area of your work, the light will create more glare during illumination that bothers you instead of helping you.


Correlated Color Temperature


The selection of color temperature will also impact your lighting experience. So, there are some values of color temperature showing the nature of lighting after installation. Every value of color temperature is suitable for specific applications. For example, some people prefer a high value of more than 5000K to get daylight white light or beyond that for their space. But, the value is not appropriate for providing the best illumination as your construction lights with high color temperature will create eye fatigue and not allow you to work regularly under the lighting without any hassle. Also, it may create glare and reflection that might bother you.


LED work lights


Vibrations


Choosing LED work lights needs your special consideration, including a vibration check. First, it is necessary to look at protecting your light against vibration. You need to install or use lights on your construction site where machinery or uneven ground can cause cracks in your lighting brackets. Not only this, but the vibration also shakes the components of the PC board, which results in the light not working properly. Before purchasing, keep in mind that the lighting fixture you are choosing is tested to withstand the vibration.


Light Quality


It will be essential to consider the light quality of your portable hanging lighting for construction Jobsite. Your light's quality can help you stay focused on work rather than distract you by shadows or glare. At the construction site, it is vital for a lighting fixture to remove all the dark spots and brighten up the field properly with quality lighting. In addition, the poor lighting quality resists you from focusing on a specific work that is not good for you.


Light Coverage


It is another thing that people forget to consider when purchasing LED work lights and then feel disappointed by the lighting result. So, it is essential to estimate the total coverage that your lighting fixture can cover prior to choosing the perfect one for your location. Your LED work lights should cover a large area to light up to make your construction or any other work easy.


Light Quantity


After you check all the important details in your LED work lights, you must confirm the number of lights required for your site. The number of lighting fixtures you are going to install in your place also affects the overall lighting. If you place more lights at a short distance, it may result in strong hotspots and glare. Along with the placement, the position of the lights also increases or decreases your lighting experience.


Conclusion


These are some most common mistakes that people make when purchasing LED work lights. If you are considering buying construction lights, you must make sure that you do not repeat these mistakes. The perfect lighting fixture will not disappoint you even after several years of performance, but you must choose it wisely. Construction lights are portable, and you can hang them at your site to get instant lighting.
Labels:
Location: United States

Comments

Post a Comment

Popular posts from this blog

5 Ways to Improve Your Garage Lighting

  How often do you realize the importance of a garage? You may use the garage for parking the car, as a storage facility, or as a workshop. It is possible that you use the garage for pretty much all of the reasons in the previous sentence. However, have you ever given a thought to its lighting? All the serious DIY work that you’ll do in the garage needs good lighting. A poorly-lit garage can do you no good. The use of premium-quality lighting fixtures can help prevent falls and injuries during work, as it will promote visibility. Here are 6 ways to illuminate your garage and enhance its safety, efficiency, and aesthetics! There are a plethora of lighting fixtures, Choose wisely! When it comes to lighting a garage people do not look beyond the overhead lighting fixture category. Well, that’s bad! You must not fall for age-old traditions that tell that garage lighting must be enough to meet the need. Go window shopping, visit online stores before you find lighting fixtures that serve...
Post a Comment
Read more

LED Flood Lights vs. LED Spotlights

When doing an outdoor lighting project, there are so many options to choose from. Among all available lights, the most energy-efficient ones are easily LED technology. Once you know LED is the way to go, you have to know what beam you need, how wide a beam is necessary, and how to calculate the beam spread you'll need. Let's look at a few of the key differences between an outdoor LED flood lights and the LED spotlight. The difference in beam angle will determine what you can use each for, and it essentially comes down to personal preference in most cases. The only time that it matters is when picking out your LED flood light and LED spotlight options. Flood Lights: Floodlights typically have a beam angle between 60-120 degrees, wide enough to cover a large area without much adjustment. The spotlights we offer all have a beam angle of 7 or 8 degrees or even 15 degrees for the super focused beam. With such a narrow beam, it can be hard to adjust the angle. As far as wattage goe...
Post a Comment
Read more

How to Retrofit LED Tube Lights?

  Fitting an LED tube is an easy task. However, one must first know which ones to choose among the three types of LED tubes available on the market. There are four kinds of LED tubes: ballast compatible tubes, ballast bypass tubes, retrofit tubes, and hybrid tubes. In the present scenario, many households and commercial facilities are still in the process of transitioning to the more modern and energy-efficient LED technology. Yet, it’s quite common to see existing fluorescent tube fixtures in many properties. Since, installing  LED tube lights   in brand new properties (offices, homes, etc.) is pretty much self-explanatory,  here we will focus on the retrofitting process. The process for retrofitting an LED tube light into any existing fluorescent strip lighting fixture module differs slightly. The differences in the installation process depends on what type of fixture setup is in use. One of the major deciding factors is the age of the pre-existing fixture. Older f...
Post a Comment
Read more