Skip to main content

LED Flat Panels: A basic knowledge

how to install flat panel led light

A pleasant brightness in the room is one of the essential components of a room. Unfortunately, fluorescent lights are not perfectly balanced, making the eye uncomfortable. Substitution for fluorescents, i.e., LED Panel Light, is ideal as it disperses brightness in all directions for better visuality & ambiance. LED lights are great for commercial and residential purposes as it produces peaceful & warm feelings turning your workspace or house into a beautiful environment. In addition, LED panel light uses less power to generate a high amount of light than fluorescent lights, which help in thousands of hours of energy savings. LED panel lights are now incredibly growing due to their quality and better performance than fluorescent lights. 

It is available in the market for both commercial and residential locations. The performance of LED office light fixtures depends on their variants, and it should lead to a hassle-free installation.  

LED vs. Fluorescent

Choosing the modern LED Panel Light is safer and smarter than fluorescent lights. Fluorescent carry mercury vapor, which causes a small risk if the bulbs break as they are hazardous. Many people discard fluorescent bulbs in the trash after expiration, but it is illegal to discard them. A recent study shows that more than 10% of Americans are fluorescent light-sensitive because it causes migraines and eye strain. But these problems are only caused by fluorescent, not by LED lights.

One of the fantastic factors with LED lights is that they can be installed anywhere & available in almost every dimension. Furthermore, they can perfectly fit in ceiling grids with minimum space above the t-bar as they are streamlined and thin. It is easy to integrate led panels into existing and new installations as their designs are perfect and sleek. For commercial purposes, these LED office light fixtures distributed even lighting to illuminate the farthest corner of the place.

Mounting and Color Temperature

Mounting is an integral part of installing LED lights. There are ways to mount flat panels such as pendant, surface, and recessed. Surface mounting is quick and simple as placed against the T-bar in ceilings. Pendant mounting uses a hanging chain or wire to hang the panel into the top. 

how to install led flat panel light

If you don’t have the drop ceiling in your room, you can use recessed mounting. 

LED Panel Light mostly comes with three color temperatures measured in Kelvin. The three-color temperatures available in led panel lights are 4000K (Cool White), 5000K (Daylight White), 6500K (Crystal White). Cool white is excellent for commercial areas where you need to focus on small details. 

Conclusion

Led lights are the most demanded in the market because they provide excellent illumination and energy saving. Choosing the Led Panel lights over fluorescent is the best decision you can make for your ceiling. Take an expert guide before finalizing your decision regarding LED panel light purchase, as lighting plays a vital role for both homes and businesses. LEDMyplace can help you find the perfect LED lights that come with a  5 years warranty and stand ideal in by all the necessary certifications. Visit to get more information about the panel lights, variants, and specifications.

Comments

Popular posts from this blog

5 Ways to Improve Your Garage Lighting

  How often do you realize the importance of a garage? You may use the garage for parking the car, as a storage facility, or as a workshop. It is possible that you use the garage for pretty much all of the reasons in the previous sentence. However, have you ever given a thought to its lighting? All the serious DIY work that you’ll do in the garage needs good lighting. A poorly-lit garage can do you no good. The use of premium-quality lighting fixtures can help prevent falls and injuries during work, as it will promote visibility. Here are 6 ways to illuminate your garage and enhance its safety, efficiency, and aesthetics! There are a plethora of lighting fixtures, Choose wisely! When it comes to lighting a garage people do not look beyond the overhead lighting fixture category. Well, that’s bad! You must not fall for age-old traditions that tell that garage lighting must be enough to meet the need. Go window shopping, visit online stores before you find lighting fixtures that serve...

LED Flood Lights vs. LED Spotlights

When doing an outdoor lighting project, there are so many options to choose from. Among all available lights, the most energy-efficient ones are easily LED technology. Once you know LED is the way to go, you have to know what beam you need, how wide a beam is necessary, and how to calculate the beam spread you'll need. Let's look at a few of the key differences between an outdoor LED flood lights and the LED spotlight. The difference in beam angle will determine what you can use each for, and it essentially comes down to personal preference in most cases. The only time that it matters is when picking out your LED flood light and LED spotlight options. Flood Lights: Floodlights typically have a beam angle between 60-120 degrees, wide enough to cover a large area without much adjustment. The spotlights we offer all have a beam angle of 7 or 8 degrees or even 15 degrees for the super focused beam. With such a narrow beam, it can be hard to adjust the angle. As far as wattage goe...

How to Retrofit LED Tube Lights?

  Fitting an LED tube is an easy task. However, one must first know which ones to choose among the three types of LED tubes available on the market. There are four kinds of LED tubes: ballast compatible tubes, ballast bypass tubes, retrofit tubes, and hybrid tubes. In the present scenario, many households and commercial facilities are still in the process of transitioning to the more modern and energy-efficient LED technology. Yet, it’s quite common to see existing fluorescent tube fixtures in many properties. Since, installing  LED tube lights   in brand new properties (offices, homes, etc.) is pretty much self-explanatory,  here we will focus on the retrofitting process. The process for retrofitting an LED tube light into any existing fluorescent strip lighting fixture module differs slightly. The differences in the installation process depends on what type of fixture setup is in use. One of the major deciding factors is the age of the pre-existing fixture. Older f...