Getting Started With LED Pole Lights

Why are LED pole lights important?

The installation of power-efficient light fixtures is often overlooked when it comes to securing the outer premises. High-quality LED pole lights are installed to illuminate the exteriors of the residential areas, walkways, and parking lots for proper brightness and to secure the outdoors. Let’s follow a simple guide to upgrading to LED parking lot lights from conventional outdoor light fixtures.

Getting started with LED pole lights

First of all, be familiar with the requirements of your premises. Second, do adhere to the city council or municipality guidelines when installing LED light fixtures.

Prepare a plan and consult with a lighting expert regarding the number of lights required to illuminate your premises. Do check the wind speed and also the type of soil presence of the area.

Installation guide

Step 1

The first step is to purchase the LED pole lights that meet the requirements of your premises. Secondly, detach the rubber gasket and adapter plate from the bracket.

Step 2

Fix the square or round pole bracket. Make sure that the fixture surface should be matching with the installation holes.

Put the square/round pole bracket against the fixture surface and the rubber bracket between the pole brackets and the required fixture surface. Then attach the pole brackets with the bolt.

Attach the bolster plate with the inside surface and then tighten the plate with bolts.

Step 3

Push the wires which are attached with the square/round pole brackets through the hole. It protects the wire from damage.

Connect the pole wire with the power wire. Make sure both connection and wire are connected correctly.

Attach the rubber gasket and junction box cover with the help of the bolts.

Step 4

Make sure that you adjust the body of the lamp to the required angle. Tighten it with bolts.

Precautions

Consult with a lighting professional before installing the LED pole lights.

Use protective gloves and gear for protection against injuries.
If there is fire or smoke visible from the fixture during the installation process, turn off all power outlets and secure the premises.

Do abide by the local rules and regulations at the time of installation.

Comments

LED Tubes: Advantages of LED T8 Light Solutions

Since the launch of LED technology, The new generation of T8 LED tubes delivers optimum brightness at low power consumption. These tubes are divided into three types. Type A: Ballast Compatible Type B: Not compatible with the ballast Type A + B: Can work with or without the help of ballast The ballast section controls energy distribution to ensure that the required voltage, current, and waveform are present when a traditional light source like the fluorescent tubes or HID lamps is turned on and operated. T8 LED bulbs do not require this additional electricity consumption; therefore, eliminating the ballast saves you energy right away because you aren't wasting energy to ballast draw. Each modified fixture uses a few watts less without a ballast. T8 retrofits assist the older fixtures by using the ballast feature to control power consumption and distribute uniform brightness. Usually, the use of ballast has lowered down, giving way to new generation T8 LED tubes. ...

High Bay LED Lights: Effective Warehouse Lighting Solutions

Finding the right lighting solution for your warehouse can be difficult, and it requires careful planning. LED warehouse lights come with lower maintenance costs and better quality illumination. A lot depends upon warehouse layout and illumination requirements in accordance with the work areas. They are also required for factories, workshops, body shops, and commercial shops. Ceiling height The ceiling needs to be high enough for warehouse lighting solutions. The ideal height should be kept between 15ft-25ft with 21,000 lumens of brightness provided by the LED warehouse lights. Less heat The difference between traditional lighting and LED warehouse lights is the dissipation of heat. UFO LED high bay lights to generate less heat and also help in lowering the business costs. Durability Factories and warehouses have a rugged environment where heavy machinery and equipment are frequently used. High bay LED lights stand against a busy warehouse's wear and tear for a longer time duratio...

4 Basic Considerations While Choosing Your LED Panel Light

LED light panels are a popular choice for both residential and commercial lighting purposes. They are energy efficient, long-lasting, and versatile, making them an excellent choice for many uses. When choosing LED light panels, there are some basic considerations that you should keep in mind to ensure that you get the best product for your needs. Size and coverage: One of the first things to consider is the size of the LED light panel that you need. You should think about the size of the area that you want to light and choose a panel that is appropriate for that space. You should also consider the beam angle illumination of the panel, as this will affect how much coverage it offers. Brightness: Another important factor to consider is the brightness of the LED light panel. You want to choose a panel that is bright enough to provide sufficient illumination for the area that you are lighting. You should also consider the purpose for which you need the light, as this will help you under...

LED Lights - Accessories

Search This Blog