Some Questions You Should Know Answers To About LED Pole Lights

LED pole lights or LED security lights are an integral part of outdoor lighting.

Here are some questions that you should ask and know answers to, about LED pole lights.

Why Consider LEDs at all?

The primary reason that people prefer LED pole lights is because of their lifespan.

A long life span is an important consideration for these lights. Here is a brief comparison of all lighting options in LED lighting.

LED -- 25,000 to 100,000 hours(5 years-10 years)

Incandescent light bulb -- 1,200 hours

High and low-pressure sodium light -- 20,000 hours to 24,000 hours(2 years-2.5 years)

Halogen light bulb -- 2,500 hours(6 months max)

Mercury vapor light -- 24,000 hours(2.5 years)

Fluorescent light bulb -- 7,000 hours to 15,000 hours(9 months-1.5 years)

Metal Halide -- 6,000 hours to 15,000 hours(1 year-2 years)

High-intensity discharge light -- 6,000 hours to 24,000 hours.(9 months-2.5 years)

As one might observe, LED lights are one of the best lights in terms of long life.

Though the initial cost of installation of these lights is quite high, long term savings is far higher with LED lights compared to any other lights out there.

Which Fit Is The Best Of All?

There is no single way to mount LED pole lights, but many.

Here are some of the ways to mount LED pole lights.

Slip Fit Mount-

These are the most common type of mount. It has a sliding-type mechanism that goes up to 2 3/8 inch over a standard LED pole light. The head of the mount adjustable, which is considered to be a great feature, so this is a great mount type as well.

Flood Mount

Flood mount lights are used on walls and roofs. They have a bracket that runs sideways, which helps it in up and down tilt. These mounts are not very popular due to the fact that their width is just too much for metal poles.

Arm Mount

Cleanest in the looks, these mounts can be screwed straight into the pole. Another great advantage is that one does not need an adapter with these lights.

Yoke Mount

It finds applications in many different scenarios, but it is not always feasible and practical.

Yoke mount can not hold lights as good as other mounts, so many prefer wall mount over Yoke mount.

Comments

5 Ways to Improve Your Garage Lighting

How often do you realize the importance of a garage? You may use the garage for parking the car, as a storage facility, or as a workshop. It is possible that you use the garage for pretty much all of the reasons in the previous sentence. However, have you ever given a thought to its lighting? All the serious DIY work that you’ll do in the garage needs good lighting. A poorly-lit garage can do you no good. The use of premium-quality lighting fixtures can help prevent falls and injuries during work, as it will promote visibility. Here are 6 ways to illuminate your garage and enhance its safety, efficiency, and aesthetics! There are a plethora of lighting fixtures, Choose wisely! When it comes to lighting a garage people do not look beyond the overhead lighting fixture category. Well, that’s bad! You must not fall for age-old traditions that tell that garage lighting must be enough to meet the need. Go window shopping, visit online stores before you find lighting fixtures that serve...

LED Tubes: Advantages of LED T8 Light Solutions

Since the launch of LED technology, The new generation of T8 LED tubes delivers optimum brightness at low power consumption. These tubes are divided into three types. Type A: Ballast Compatible Type B: Not compatible with the ballast Type A + B: Can work with or without the help of ballast The ballast section controls energy distribution to ensure that the required voltage, current, and waveform are present when a traditional light source like the fluorescent tubes or HID lamps is turned on and operated. T8 LED bulbs do not require this additional electricity consumption; therefore, eliminating the ballast saves you energy right away because you aren't wasting energy to ballast draw. Each modified fixture uses a few watts less without a ballast. T8 retrofits assist the older fixtures by using the ballast feature to control power consumption and distribute uniform brightness. Usually, the use of ballast has lowered down, giving way to new generation T8 LED tubes. ...

How do LED Parking Lot Lights Affect Energy Consumption and Cost?

The quality of parking lot lights is a vital consideration for every business owner from a safety perspective. Regarding quality performance, LED parking lot lights are one of the most successful and popular lighting fixtures in the industry. Whether in terms of high-quality lighting or long lifespan, the LEDs can stand in the top position. A well-lit parking lot will help pedestrians and drivers navigate comfortably. Along with this, it will effectively decrease the chances of criminal intrusion in the parking lot. One of the significant concerns about lighting a parking lot is energy consumption and cost, which will discuss in this blog. How LED Parking Lot Lights Improve Energy Conservation? LED technology has completely transformed interior and exterior lighting. With an extensive range of lighting fixtures, advanced lighting technology brings a new and unique experience. Along with this, the way of consuming electricity during brightness emission is highly efficient. Well, some k...

LED Lights - Accessories

Search This Blog